Bernina Sergers Sewing Machine User Manual


 
Mastering
Your
BERNINA
®
BERNINA
®
Sergers
MASTERING YOUR BERNINA
®
SERGER 2/15/03
94
Notes
©2003 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Wide Two-Thread Flatlock
Attach the 2-thread adapter (upper looper converter) to the upper
looper. Note: This is an optional accessory for the 700D.
Following the instructions in your owner’s manual, thread the serger for
a 2-thread flatlock stitch using Jeans Stitch in the lower looper. Adjust
settings as indicated.
Adjust the stitch length to 2.5mm.
Fold the fabric in half to 2” x 6” and position it halfway between the left
needle and the stitch finger. Optional: Attach the Right Seam Guide.
Move the Right Seam Guide halfway between the needle and the stitch
finger.
Slowly serge the fabric. The looper threads will extend beyond the
fabric on the right side of fold.
Gently pull the fabric flat
Return stitch length and thread tension levers to normal.
Trim and mount the sample.
Fabric ........................................................ mediumweight cotton, 4” x 6”
Needle............................................................................. 80/12 Universal
Thread.....................................................................1 cone serger thread
........................................................................... 1 cone YLI Jeans Stitch
Presser Foot .............................................................................. standard
Stitch ...................................................................... wide 2-thread flatlock