Filter
Top Products
Mastering
Your
BERNINA
®
BERNINA
®
Sergers
MASTERING YOUR BERNINA
®
SERGER 2/15/03
80
Notes
©2003 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Blindstitch Foot -
Joining Lace to Lace
Set the serger for a narrow 3-thread overlock stitch (right needle).
Adjust settings as indicated.
Loosen the right needle tension slightly.
Pull the rolled hem lever towards you.
Adjust the stitch length to 1.5mm.
Attach the Blindstitch Foot.
Move the fabric guide just to the left of the knife line on the stitch plate.
Stiffen the lace with spray starch or fabric stiffener.
With right sides together, place the header of the laces under the
presser foot against the guide.
Serge the laces together.
Gently pull the lace flat and press.
Trim and mount the sample
Fabric ..............................................2 pieces of flat edging lace, 6” each
Needle............................................................... 70/10 Sharp or Microtex
Thread...................................................................3 cones serger thread
Presser Foot ............................................................................Blindstitch
Stitch ................................................................ narrow 3-thread overlock