Filter
Top Products
Mastering
Your
BERNINA
®
BERNINA
®
Sergers
MASTERING YOUR BERNINA
®
SERGER 2/15/03
86
Notes
©2003 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Cording Foot -
Wire-Edged Fabric
Set the serger for a 3-thread rolled edge (right needle) with Woolly
Nylon in the upper looper. Adjust settings as indicated.
Pull the rolled hem lever towards you.
Adjust the stitch length to 1.75mm.
Set cutting width at 1.5.
Attach the Cording Foot. Following the direction in the instruction leaflet
for the Cording Foot, insert the wire through the guides.
Place the fabric under the presser foot and serge along one 18” edge,
feeding the wire through the foot as you serge.
Use wire cutters to cut the wire. Do not use the serger knives.
Repeat for the other 18” edge of the fabric.
Return stitch length and thread tension levers to normal.
Return the rolled hem lever to normal sewing position.
Secure the thread tails with a seam sealant. When the sealant is dry,
cut the thread tails. Use wire cutters to trim the wire, if needed.
Tie the wired fabric into a bow.
Trim and mount the sample.
Fabric ....................................................... mediumweight fabric, 3” x 18”
Other ..............................................28 gauge floral wire, two 24” lengths
Needle............................................................................. 80/12 Universal
Thread...................................................................2 cones serger thread
..........................................................................1 cone YLI Woolly Nylon
Presser Foot ................................................................................Cording
Stitch ........................................................................3-thread rolled edge