Filter
Top Products
Mastering
Your
BERNINA
®
BERNINA
®
Sergers
MASTERING YOUR BERNINA
®
SERGER 2/15/03
18
Notes
©2003 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Dealers
Stitch Length Adjustment
Fold fabric in half to 3” x 6”.
Using a fabric marker, divide the fabric into four equal sections along
the folded edge.
Thread the serger for a four thread overlock stitch. Fine tune the
settings as needed. Set the cutting width and the differential at their
normal settings.
Adjust the stitch length to 4mm. Serge to the first mark along the
folded edge, trimming the fold slightly.
Adjust the stitch length to 3mm and serge to the second mark.
Adjust the stitch length to 2mm and serge to the third mark.
Adjust the stitch length to 1mm and serge to the end.
Mark the stitch length settings on the fabric sample.
Trim and mount the sample.
Return stitch length to its normal setting, 2.5mm.
Fabric .......................................................................... firm fabric, 6” x 6”
Needle............................................................................. 80/12 Universal
Thread...............................................................4 cones of serger thread
......................................................................... (yellow, red, green, blue)
Presser Foot .............................................................................. standard
Stitch ............................................................................ 4-thread overlock