Filter
Top Products
Page 16 AXIS T8414 User’s Guide
Camera Type- AXIS Camera (by default)
User Name - enter the user name for the camera. By default Axis’ products have “root”
Password - enter the password for the camera. By default Axis’ products use “pass”. To reveal
the password being entered, tap Show.
Management Port, Streaming Port, Streaming Format, and Streaming Protocol can be left at
their default settings unless the camera has been set up with different settings.
2. To save a new camera profile, make changes and tap the “+” key. To delete a camera profile,
find it in the list and tap the “-” key.
3. When finished, tap the Enter button and tap the Return button.
Note: If AXIS T8414 detects a camera with an IP address on a different subnet it will
automatically change its own address so that a connection becomes possible.
Setup - IP camera
These settings are advanced and not normally
required. To make particular settings for an
individual camera, tap the IP camera icon and
enter the network setting of a network camera.
Import Camera Type - used to import a text file
containing camera configuration information from
a USB memory stick.
Load from Camera - Load the current camera configuration, which can then be modified and
reloaded to the camera, using Set to Camera.
Setup - AV
Tap the Setup - AV icon to open the Video Display setup page, from where you can adjust video
brightness, sharpness and contrast. Use the up or down keys on the AXIS T8414 front panel to move
among the items, or tap the icon on the right-side of the value indicator. To adjust the value, press
the left/right keys on the front panel or tap the slider in the page.
Tap the Enter icon to save the settings.
Tap this icon to switch between
brightness, sharpness and contrast