Filter
Top Products
AXIS T8414 User’s Guide Page 13
ENGLISH
Power over Ethernet
AXIS T8414 delivers PoE to Axis network video products with PoE support either from the unit's
battery or from PoE by-pass. Tap this icon to turn on and off Power over Ethernet.
PoE Setup
To enable that PoE starts as soon the AXIS T8414
itself is powered up, select ON from the drop-down
list. To limit the amount of time that PoE will be
enabled when there is no camera connected, select
the number of seconds from the PoE auto-
shutdown after drop-down list.
Power Level
The output Power Consumption Level range can be
set according to different needs. The options include
<Very Low (~3W)>, <Low (3~5W)>, and Mid-High
(6~25W+EXT 12V)>.
Note:
Please make sure the PoE function is set to Off
before changing the Power Level setting.
PoE Measurement
The information includes voltage (V), current (I) and
power consumption (P) of Power over Ethernet (PoE)
which can be measured according to different
Ethernet circumstances. Select from the drop-down
list of <PoE Measurement> to fit your Ethernet
condition and show the PoE Measurement
information on the screen while using PoE.