Filter
Top Products
Page 14 AXIS T8414 User’s Guide
PoE Measurement Display
Select the desired combination of PoE Measurement
information from the drop-down list, including
Voltage (V), Current (I), and Power Consumption (P).
Enable PoE after Tester Bootup
To enable PoE while the Tester is booting up, please
select <ON> from the drop-down list of <Enable
PoE when booting>.
The Tester will provide power to the camera right
after system startup.
PoE Auto-shutdown
Set the PoE auto-shutdown interval to 20 seconds,
40 seconds or 60 seconds. The setting will help save
battery when there is no network camera or other
device using the Tester as the PSE. A reminder will
show 5 seconds before shutting down.
Tap <Enter/Save> to save all the settings and
you will then automatically be directed to the Home
Screen. Or tap <Return> to exit the setting page
without saving settings.