Filter
Top Products
AXIS T8414 User’s Guide Page 15
ENGLISH
SETUP
Under SETUP are the menus for IP, AV, System, and Snapshot
Setup - IP
Setup - IP connection
These settings are optional and advanced. In most
situations the you will not need to change them.
The settings that cannot be changed are intended
for future use. Leave other settings as they are,
unless specifically required.
1. Tap the Setup- IP connection icon. Enter the
information in each field using the stylus.
AXIS T8414 - The IP address can be set to DHCP or to a fixed address. DHCP is the default set-
ting and should be used in most situations, even when there is no actual DHCP server available
via a network. The IP address is grayed out when set to DHCP. To set a fixed address, tap Set,
change the IP address and then tap the Enter icon.
Camera Profile - this allows you to store camera configurations so that they can be recalled
later. Select a profile from the list, or change the name and settings.
Camera IP - enter the network camera’s IP address.