Filter
Top Products
Maintaining Your Appliance 29
© Travis Industries 100-01157 4041116
Blower and Electrical Parts
Description Qty Part # Description Qty Part #
Left Blower 1 228-10069 Right Blower 1 228-10070
Blower Grommet and Spacer (4) 2 93005017 Rheostat 1 100-00122
Rheostat Knob 1 100-04111 Power Cord 1 100-00260
Firebox Parts
Baffle Parts
ID # Description Qty Part # ID # Description Qty Part #
1 Sec. Air Tubes w Pins (all 4) 1 98900742 2 Air Tube Pin (w Screw) 4
3 Baffle Front 1 210-05342 4 Baffle Rear 1 210-05343
5 Baffle Brick (see page 31) 6 Bypass Plate 1 221-12120
7 Damper Plate Assembly 1 221-12122 8 Damper Yoke 1 221-12123
9 Damper Rod Extension 1 100-11508
Baffle Removal
1 Remove the face to prevent damage. Open the doors.
2 Remove the front two air tubes (see "Air Tube Removal & Replacement" on the following page).
3 Remove front baffle support (rotate it forward to disengage it from the rear baffle).
4 Remove front row of six bricks.
5 Unscrew the damper rod extension from damper yoke and slide it forward to remove (you may
need to use pliers to unscrew the rod).
6 Lift the damper yoke up to disengage it from the damper plate. Remove the yoke from the stove
(this requires some angling and rotation to remove).
7 Remove the bypass plate and damper assembly by pulling forward and leaning the front edge
down.
8 Remove the four rear bricks.
9 Remove rear baffle by angling one side down and then removing at an angle through the firebox
opening.