Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
F232085
16
Machine Dimensions
Dimensional Clearances
Allow a minimum of 24 inches (60 cm) at the rear and
18 inches (45 cm) at the sides for maintenance,
inspection, and adjustment. Allow at least 18 inches
(45 cm) between machines in multiple installations.
Machine dimensions are indicated in Figure 2 and
specified in Table 2.
NOTE: The dimensions shown here are for
planning purposes only. They are approximate and
subject to normal manufacturing tolerances. If
exact dimensions are required for construction
purposes, contact the distributor or manufacturer.
We reserve the right to make changes at any time
without notice.
Table 2
UW 2 Speed Pocket Hardmount Machine
Dimensions (refer to Figure 2)
Dimensions
35 60
in. mm in. mm
A 30-1/8 765 35-5/8 905
B
*
32-1/2 826 36-5/8 930
C 23-3/4 603 28-1/4 718
D 38-1/4 972 45 1143
E1/213125
F 55-1/2 1410 64-1/2 1638
G 30-1/2 775 36 914
H 8 203 15-1/2 394
I 43-7/8 1114 55 1397
* Overhang dimensions for the optional starch dispenser
are as follows: UW35, 3-7/8 inches (9.86 cm); UW60,
1-3/4 inches (4.45 cm).