Filter
Top Products
3
DESCRIPTION
The Model AEG-WR Supervised Wireless Receiver allows up to 64 unique wireless security
transmitters to report information to an Aegis automation controller. The wireless transmitters
replace wired door and window sensors, as well as wired smoke, motion, and glassbreak
detectors. These transmitters report status information to the AEG-WR Receiver which, in
turn, processes the information and reports it to the controller.
The receiver is compatible with transmitters manufactured for the Aegis prodcuct by Linear
Corporation. It supports Linear's Supervised S1, Megacode, and SX format transmitters.
COMPATIBLE TRANSMITTERS
We recommend the use of the SX format transmitters. These transmitters have an open air
range of over 1000 feet. The SX format features compressed, encrypted data with error
detection and correction for increased range, reliability, and ease of installation. Each of the
SX format transmitters is factory programmed with one of over 16,000,000 I.D. codes.
The following are the most popular SX format transmitters that may be used:
T-90 Door/Window Transmitter - Used in the place of a wired magnetic switch, this
stationary sensor has a built-in magnetic switch with adjustable magnet, may be
connected externally to monitor other types of sensors, and is self-testing. It uses
surface-mount technology and a lithium battery with a life expectancy of over 5 years
TMD-90 Passive Infrared Motion Detector - Uses passive infrared heat detection to
sense motion
TGB-90 Glass Break Detector - Used to detect both audio emissions and shock
vibrations of breaking glass
TSD-90 Smoke Detector - Supervised photoelectric smoke detector
TX-91, TX-92, and TX-94 Hand-Held Transmitters - One, two, and four button
portable sensors
Although HSP recommends the use of SX series transmitters, 303.875 MHz S1 and Megacode
transmitters may also be used with the AEG-WR Wireless Receiver. You can use up to 64
unique transmitters with the AEG-WR Receiver. Each zone reported to the controller can have