Filter
Top Products
– 77 –
Troubleshooting Guide (cont’d)
Trouble or Error Display Description Action
Fire, SPV or Holdup points
bypassed.
Some fire, supervisory, or
holdup points are
bypassed.
• Check with your ADT
Service Representative to
determine when they will
be restored.
Cannot turn on! System must
be reset by ADT.
Your system is
programmed with the
ADT reset option.
• Contact your ADT Service
Representative to reset
your system.
Code incorrect.
User has entered an
invalid ID code.
• Press “Try again” button
and re-enter a valid 6-digit
ID code.
Code incorrect. Keyboard
locked. Please wait.
User has entered 18
incorrect ID code digits.
• Wait 60 seconds for the
operating panel lockout to
expire and re-enter a valid
ID code.
Cannot turn on! Some points
are abnormal.
There are some abnormal
protection points within
the group you selected.
• Press “See points” button.
• Inspect and secure (return
to normal) these points
befroe turning this group
on.
Too many points bypassed.
Bypass warning. Too
many points are
bypassed, which may
compromise building
security.
• If you do not have bypass
capability, check with your
Security Manager before
proceeding.
• If you have bypass
capability, unbypass some
of these points before
turning the system on.