Filter
Top Products
– 32 –
System Programming
Introduction
Your FOCUS 200 PLUS security system is easily customized to meet your
specific security and monitoring requirements. During installation, your
ADT representative will review all system options and will recommend
certain features and functions to accommodate your facility and daily
business routines.
Certain system features and functions can be reprogrammed (changed) from
your remote operating panel. However, to program or reprogram your
system, you must use an ID code that has been assigned with the
appropriate “privilege level” (see User Data later in this section).
You can enter, display, add, delete, and/or change system data from your
operating panel. However, as changes are made, keep accurate and up-to-
date records to avoid potential errors in the future.
Note: Certain system features and functions must be controlled from the
ADT Customer Monitoring Center. Prior to modifying your system, it is
advisable to check with your ADT Service Representative.
Your interactive operating panel provides four lines of information and/or
messages that prompt you through a simple selection process. If you are
unsure of a procedure, or require additional information or explanation of a
feature or function, simply press the "Help" selector button. You can use the
"Help" button at any time without interfering with the operation in process.
User Data
Your FOCUS 200 PLUS system accommodates up to 255 different six-digit
ID codes. Users must be assigned an ID code in order to access the operating
panel. The first two digits represent the user number. The last four serve as
the Personal Identification Number (PIN), which uniquely identifies the
person operating the system. Without a valid ID code, a user will not be able
to access or operate the system.