Filter
Top Products
– 43 –
System Programming (cont’d)
4. Press Daylight to display “Spring Daylight” description and programmed
date.
5. Press Previous or Next to toggle between “Spring Daylight” description
and “Fall Daylight” description and the date you want to change.
6. Press Change to display the selector buttons for entering a new spring or
fall description.
7. Press Continue to display current and new date entry field.
8. Using the operating panel’s numeric keypad, enter the new date.
Example: April 9th is entered 0409.
9. Press Enter to complete your entry and display the new date.
10. Press Quit to display the previous screen. Repeat steps 5 to 9 for the
second date.
11. Press Quit to display the Time Selection Menu.
Daily Operating Schedules
Your FOCUS 200 PLUS system can accommodate two distinct daily
operating schedules (two opening times and two closing times) for each day
of the week for each Burglary (BA) group. Daily operating schedules may be
used to restrict access to the facility and/or system. Users who have not been
assigned “open regular” privilege will be denied access (key or card access
control) or will trip an irregular opening alarm if a BA group is turned off
outside the schedules or on holidays. These schedules also enable your
system to automatically alert the ADT Customer Monitoring Center if the
burglary protection was turned on at the proper time. Your system can also
accommodate schedule limits, which prevent schedule changes that are
outside the schedule limits.