A SERVICE OF

logo

C122-E003-02EN 8-293
GSWB
8.3 Operation Commands
- port-channel 1-7
- InternalPort 1-8
- port 1-43
If this parameter is omitted, statistical information about all interfaces is deleted.
(3) Command mode
user exec
enabled exec
(4) See also
show ether statistics
show interface counter
(5) Examples
Specifies all slots
Specifies the connector
(6) Error Messages
Port-channel ** is not defined.
Cause: An undefined channel group is specified.
Action: Check the channel group definition.
% Not implement daughter card.
Cause: An unmounted interface is specified.
Action: Check the device implementation status.
% Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
Switch# clear ether statistics
Switch#
Switch# clear ether statistics GigabitEthernet 0/1
Switch#