3-60 C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
Table 3.37 Displayed and setting items in the [KVM] window
Table 3.38 Button in the [KVM] window
(1) Menu operation
[System] → [Other Boards] → [KVM]
Item Description
Board Information
Status KVM status:
• OK: Operating normally
• Not present: Not installed
• Degraded: Component failure (The faulty component can be
isolated to continue operation.)
• Failed: Failure
Power Status KVM power status:
• On: Powered on
• Standby: Standby mode
Part Number KVM part number
Serial Number KVM serial number
Location LED Location LED status
The three light statuses are as follows:
• On: Currently lit
• Off: Currently not lit
• Blink: Currently blinking
The LED can be turned on, turned off, or set to blink by clicking a
radio button.
Vo l t a g e
Sensor Voltage sensor type
Vo l t a g e Current voltage reading
Threshold Warning
(Low/High)
Lower and upper limits of the warning-level voltage. If no limit is
set, "-" is displayed.
Critical
(Low/High)
Lower and upper limits of the critical-level voltage. If no limit is
set, "-" is displayed.
Button Description
Status Clear Clears the error status of the KVM and attempts to use the KVM at
the next reboot.
