A SERVICE OF

logo

User-defined Characters
Note: See Chapter 7 for sample programs and further information.
The commands are available in the draft mode only.
ESC &
Define User-defined Characters
Format:
ASCII code:
ESC
& NUL (d1) (d2) ...
(dn)
Decimal:
27
Hexadecimal: 1B
Comments:
38
0 (d1) (d2) ...
(dn)
26
00 (d1) (d2) ...
(dn)
This command allows characters to be redefined in the currently
selected mode.
l Epson only
ESC :
Copy ROM Into RAM
Format:
ASCII code:
ESC : 0 0 0
Decimal:
27 58 0 0 0
Hexadecimal :
1B
3A 00 00 00
Comments:
This code allows the characters in the FX-286 ROM to be copied
into RAM so that specific characters can be redefined.
l
Epson only.
ESC %
Select User-defined Set
Format:
ASCII code: ESC % (n)
Decimal:
27
37 (n)
Hexadecimal: 1B
25 (n)
Comments:
This code selects the user-defined set if n = 1 and the normal set if
n = 0. ESC & is required to define the character set.
l
Epson only.
G-27