Epson FX-286 Manual

A SERVICE OF

next previous

ESC (space)

Select Character Space

Format:

ASCII code: ESC (space) (n)

Decimal :

27

32 (n)

Hexadecimal: 1B

20 (n)

Comments:

Determines the amount of space added to the right of each charac-

ter, specified in dots (l/72 of an inch).

n = number of dots

n = 0 to 63 (MSB ignored).

NLQ only.

l

Epson only.

ESC $

Format:

ASCII code: ESC

Decimal:

27

Hexadecimal: 1B

Comments:

Select Absolute Dot Position

$ (n1) (n2)

36 (n1) (n2)

24 (n1) (n2)

This sequence specifies the position from which subsequent charac-

ters are to be printed. The dot position is specified by n1 and n2; n1

is the lower byte of the dot position, and n2 is the higher byte.

Specifying the dot position as 0 (specifying 0 for both n1 and n2)

results in printing at the left margin; however, the sequence is

ignored and the previous setting remains effective if the position

specified is beyond the right margin. A dot is l/60 inch.

n1 = 0 to 255

n2 = 0 to 3

NLQ only.

l

Epson only.

G-22