A SERVICE OF

logo

Open as PDF
next previous
takes over and the FX-286 starts printing out the Standard IBM Pro-
printer character set, as shown in Figure A-2.
Figure A-2. IBM Prop-inter mode self test
If you want to see the Alternate set, turn the power OFF. Then reset
either switch
1-6, 1-7,
or 1-8 from ON to OFF, and run the self test again.
Remember, you must also reset DIP switches
2-1
and
2-3
as previ-
ously mentioned if you want to select the IBM Proprinter mode for
uses other than the self test.
Tables
A-1
and
A-2
show you the functions of all the switches, and
the rest of the appendix explains each of them.
Table A-Z. DIP witch functions
Switch 1
Switch 2
A-4