Enterasys Networks DFE-Gold Series Manual

A SERVICE OF

next previous

clear tacacs server Configuring TACACS+

Enterasys Matrix DFE-Gold Series Configuration Guide 25-67

clear tacacs server

UsethiscommandtoremoveoneorallconfiguredTACACS+servers,ortoreturnthetimeout

valuetoitsdefaultvaluefor oneor allconfiguredTACACS+servers.

Syntax

clear tacacs server {all | index} [timeout]

Parameters

Defaults

Iftimeoutisnotspecified,theaffectedTACACS+serverswillberemoved.

Mode

Switchcommand,Read‐Write.

Example

ThisexampleremovesTACACS+server1.

Matrix(rw)->clear tacacs server 1

show tacacs session

UsethiscommandtodisplaythecurrentTACACS+clientsessionsettings.

Syntax

show tacacs session {authorization | accounting [state]}

Parameters

Defaults

Ifstateisnotspecified,allsession accountingconfigurationparametersaredisplayed(whichat

thistimeincludesonlytheenabled/disabledstatus).

Mode

Switchcommand,Read‐Only.

Examples

Thisexampleshowshowtodisplayclientsessionauthorizationinformation:

all SpecifiesthatallconfiguredTACACS+serversshouldbeaffected.

index

SpecifiesoneTACACS+servertobeaffected.

timeout (Optional)Returnthetimeoutvaluetoitsdefaultvalueof10seconds.

authorization Displayclientsessionauthorizationsettings.

accounting Displayclientsessionaccountingsettings.

state (Optional)Displaytheclientsessionaccountingstate.