Enterasys Networks DFE-Gold Series Manual

A SERVICE OF

next previous

clear rmon channel Configuring RMON

Enterasys Matrix DFE-Gold Series Configuration Guide 11-37

Defaults

•Ifanactionisnotspecified,packetswillbeacceptedonfiltermatches.

•Ifnotspecified,controlwillbesettooff.

•Ifoneventandoffeventarenotspecified,nonewillbeapplied.

•Ifeventstatusisnotspecified,readywillbeapplied.

•Ifadescriptionisnotspecified,nonewillbe

applied.

•Ifownerisnotspecified,itwillbesettomonitor.

Mode

Switchcommand,Read‐Write.

Example

Thisexampleshowshowtoacceptfail edcontrolondescription“captureall”createanRMON

channelentry:

Matrix(rw)->set rmon channel 54313 fe.2.12

clear rmon channel

UsethiscommandtoclearanRMONchannelentry.

Syntax

clear rmon channel index

Parameters

Defaults

None.

Mode

Switchcommand,Read‐Write.

Example

ThisexampleshowshowtoclearRMONchannelentry2:

Matrix(rw)->clear rmon channel 2

show rmon filter

UsethiscommandtodisplayoneormoreRMONfilterentries.

Syntax

show rmon filter [index index | channel channel]

index Specifiesthechannelentrytobecleared.