Enterasys Networks DFE-Gold Series Manual

A SERVICE OF

next previous

show spantree mstcfgid Configuring Spanning Tree Bridge Parameters

Enterasys Matrix DFE-Gold Series Configuration Guide 6-17

Example

ThisexampleshowshowtodisplayassignmentsforallVLANsassignedtoanySIDotherthan

SID 0:

Matrix(rw)->show spantree vlanlist

Vlan 104 is mapped to Sid 104

Vlan 105 is mapped to Sid 105

Vlan 106 is mapped to Sid 106

Vlan 107 is mapped to Sid 107

show spantree mstcfgid

UsethiscommandtodisplaytheMSTconfigurationidentifierelements,includingformatselector,

configurationname,revisionlevel,andconfigurationdigest.

Syntax

show spantree mstcfgid

Parameters

None.

Defaults

None.

Mode

Switchcommand,Read‐Only.

Example

ThisexampleshowshowtodisplaytheMSTconfigurationidentifierelements.Inthiscase,the

defaultrevisionlevelof0,andthedefaultconfigurationname(astringrepresentingthebridge

MACaddress)havenotbeenchanged.Forinformationonusingthesetspantreemstcfgid

commandtochangethesesettings,referto

“setspantreemstcfgid”onpage 6‐17:

Matrix(rw)->show spantree mstcfgid

MST Configuration Identifier:

Format Selector: 0

Configuration Name: 00:01:f4:89:51:94

Revision Level: 0

Configuration Digest: ac:36:17:7f:50:28:3c:d4:b8:38:21:d8:ab:26:de:62

set spantree mstcfgid

UsethiscommandtosettheMSTconfigurationnameand/orrevisionlevel.

Syntax

set spantree mstcfgid {cfgname name | rev level}