92 Command Groups
Voice VLAN
802.1x
Command Description Mode*
voice vlan Enables the voice VLAN capability on the
switch.
GG
voice vlan Enables the voice VLAN capability on the
interface
IC
voice vlan data priority Trusts or not trusts the data traffic arriving on
the voice VLAN port.
IC
show voice vlan Displays various properties of the voice VLAN. PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
dot1x mac-auth-bypass Enables MAB on an interface. IC
dot1x max-req Sets the maximum number of times the switch
sends an EAP-request frame to the client before
restarting the authentication process.
IC
dot1x max-users Sets the maximum number of clients supported
on the port when MAC-based 802.1X
authentication is enabled on the port.
IC
dot1x port-control Enables manual control of the authorization
state of the port.
IC
dot1x re-authenticate Manually initiates a re-authentication of all
802.1x-enabled ports or a specified 802.1X
enabled port.
PE
dot1x re-authentication Enables periodic re-authentication of the client. IC
dot1x system-auth-control Enables 802.1X globally. GC
dot1x timeout quiet-period Sets the number of seconds the switch remains
in the quiet state following a failed
authentication attempt
IC
dot1x timeout re-
authperiod
Sets the number of seconds between re-
authentication attempts.
IC
