QoS Commands 461
conform-color
Use the conform-color command in Policy-Class-Map Configuration mode
to specify second-level matching for traffic flow, the only possible actions are
drop, setdscp-transmit, set-prec-transmit, or transmit. In this two-rate form
of the policy command, the conform action defaults to send, the exceed
action defaults to drop, and the violate action defaults to drop. These actions
can be set with this command.
Syntax
conform-color
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to specify the conform-color command.
console(config-policy-classmap)#conform-color
test_class (test_class is <class-map-name>
cos-queue min-bandwidth
Use the cos-queue min-bandwidth command in either Global Configuration
mode or Interface Configuration mode to specify the minimum transmission
bandwidth for each interface queue. To restore the default for each queue’s
minimum bandwidth value, use the no form of this command.
Syntax
cos-queue min-bandwidth
bw-0
bw-1
…
bw-n
no cos-queue min-bandwidth
