480 QoS Commands
match srcl4port
Use the match srcl4port command in Class-Map Configuration mode to add
to the specified class definition a match condition based on the source layer 4
port of a packet using a single keyword or a numeric notation.
Syntax
match srcl4port {
portkey
|
port-number
}
•
portkey
— Specifies one of the supported port name keywords. A match
condition is specified by one layer 4 port number. The currently supported
values are: domain, echo, ftp, ftpdata, http, smtp,snmp, telnet, tftp, and
www.
•
port-number
— Specifies a layer 4 port number (Range: 0–65535).
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to add a match condition using the
"snmp" port name keyword.
console(config-classmap)#match srcl4port snmp
