A SERVICE OF

logo

Open as PDF
next previous
238 Address Table Commands
The following table describes the fields in this example.
show ports security addresses
Use the show ports security addresses command in Privileged EXEC mode to
display current dynamic addresses in locked ports.
Syntax
show ports security addresses {ethernet
interface
|port-channel
port-channel-
number
}
•
interface
— Valid Ethernet port
•
port-channel-number
— Valid port-channel number
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Field Description
Port The port number.
Status The status can be one of the following: Locked
or Unlocked.
Actions Action on violations.
Maximum The maximum addresses that can be associated
on this port in Static Learning mode or in
Dynamic Learning mode.
Trap Indicates if traps would be sent in case of
violation.
Frequency The minimum time between consecutive traps.