A SERVICE OF

logo

Open as PDF
next previous
366 IP Addressing Commands
Example
console(config)#ipv6 gateway 2003::1
console(config)#no ipv6 gateway
show arp switch
Use the show arp switch command in Privileged EXEC mode to display the
ARP cache entries learned on the management port.
Syntax
show arp switch
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Note that this command only show ARP entries used by the management
interface. It is logically separate from the ARP table used by the routing
interfaces. See the show arp command for details on how to view ARP entries
for the routing interfaces.
Example
The following example displays ARP table information.
console#show arp switch
MAC Address IP Address Interface
------------------- ---------------- ------------
0016.9CE1.D800 10.27.6.1 1/g37