462 QoS Commands
•
bw-0
— Specifies the minimum transmission bandwidth for an interface.
You can specify as many bandwidths as there are interfaces (bw-0 through
bw-n). (Range: 0–100 in increments of 5)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode or Interface Configuration (Ethernet, Port-
channel) mode
User Guidelines
The maximum number of queues supported per interface is seven.
Example
The following example displays how to specify the minimum transmission
bandwidth for seven interfaces.
console(config)#cos-queue min-bandwidth 0 0 5 5 10 10
10
cos-queue strict
Use the cos-queue strict command in either Global Configuration mode or
Interface Configuration mode to activate the strict priority scheduler mode
for each specified queue. To restore the default weighted scheduler mode for
each specified queue, use the no form of this command.
Syntax
cos-queue strict {
queue-id-1
} [{
queue-id-2
} … {
queue-id-n
}]
no cos-queue strict {
queue-id-1
} [{
queue-id-2
} … {
queue-id-n
}]
•
queue-id-1
— Specifies the queue ID for which you are activating the
strict priority scheduler. You can specify a queue ID for as many queues as
you have (queue-id 1 through queue-id-n). (Range: 0–6)
