![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/a/9a/a9adf4cb-3561-4928-95de-7c1533f7faee/a9adf4cb-3561-4928-95de-7c1533f7faee-bg3d9.png)
A-1
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-06
APPENDIX
A
Supported MIBs
This appendix lists the supported management information base (MIBs) for this release on the
Cisco
ME 3400 Ethernet Access switch. It contains these sections:
• MIB List, page A-1
• Using FTP to Access the MIB Files, page A-3
MIB List
• BRIDGE-MIB (RFC1493)
Note The BRIDGE-MIB supports the context of a single VLAN. By default, SNMP messages
using the configured community string always provide information for VLAN 1. To obtain
the BRIDGE-MIB information for other VLANs, for example VLAN x, use this community
string in the SNMP message: configured community string @x.
• CISCO-CABLE-DIAG-MIB
• CISCO-CDP-MIB
• CISCO-CONFIG-COPY-MIB
• CISCO-CONFIG-MAN-MIB
• CISCO-DHCP-SNOOPING-MIB
• CISCO-ENTITY-FRU-CONTROL-MIB
• CISCO-ENTITY-VENDORTYPE-OID-MIB
• CISCO-ENVMON-MIB
• CISCO-ERR-DISABLE-MIB
• CISCO-ETHER-CFM-MIB
• CISCO-ETHERNET-ACCESS-MIB
• CISCO-FLASH-MIB (Flash memory on all switches is modeled as removable flash memory.)
• CISCO-FTP-CLIENT-MIB
• CISCO-HSRP-MIB