CHAPTER
2-1
Cisco ONS 15310-MA SDH Reference Manual, Release 9.1 and Release 9.2
78-19417-01
2
Card Reference
This chapter describes the Cisco ONS 15310-MA SDH cards. It includes descriptions and block
diagrams for each card. For specifications, see Appendix A, “Specifications.”For card installation and
turn-up procedures, refer to the Cisco ONS 15310-MA SDH Procedure Guide.
Chapter topics include:
• 2.1 Card Summary and Compatibility, page 2-1
• 2.2 15310E-CTX-K9 Card, page 2-4
• 2.3 CE-100T-8 Card, page 2-6
• 2.4 CE-MR-6 Card, page 2-9
• 2.5 ML-100T-8 Card, page 2-12
• 2.6 E1_21_E3_DS3_3 and E1_63_E3_DS3_3 Cards, page 2-16
• 2.7 Filler Cards, page 2-18
• 2.8 SFP Modules, page 2-19
Note The I-Temp symbol is located on the faceplate of an I-Temp compliant card. A card without this symbol
is C-Temp compliant.
2.1 Card Summary and Compatibility
The Cisco ONS 15310-MA SDH uses a common-control card (the 15310E-CTX-K9) and a combination
of Ethernet cards (CE-100T-8, CE-MR-6, and ML-100T-8) and electrical cards (E1_21_E3_DS3_3 and
E1_63_E3_DS3_3). The 15310E-CTX-K9 card provides optical connections for the ONS 15310-MA
SDH.
This section provides a card summary. Figure 2-1 shows the ONS 15310-MA SDH fully populated with
cards.
