1-21
Cisco ONS 15310-MA SDH Reference Manual, Release 9.1 and Release 9.2
78-19417-01
Chapter 1 Cisco ONS 15310-MA SDH Shelf Assembly Hardware
Cable Routing and Management
1.9 Cable Routing and Management
Two types of cable management brackets are available for the ONS 15310-MA SDH shelf assembly: the
standard bracket, which ships with the ONS 15310-MA SDH ship kit, and the extended bracket, which
ships as a separate orderable part. You can install either bracket under the shelf assembly.
1.9.1 Standard Cable Management Bracket
The standard cable management bracket has one area in the rear that can be used for routing cables.
Fiber-optic cable can be routed through the rear trough of the bracket. Ethernet cables can be passed
through the front of the bracket to be bundled and secured using tie-wraps or other site-specific
materials.
Figure 1-12 shows the installation of the standard cable management bracket.
Table 1-8 UDC Cable Pin Assignments
RJ-45 Pin
Number
RS-232/64K
Mode
1TX +
2TX –
3RX +
4—
5—
6RX –
7—
8—
