25
Follow these steps to select a different channel in a bank as
the priority channel.
• Manually select the channel you want to select as the
priority channel.
• Press Func + Pgm, then press Func + Pri. P appears to
the left of the selected channel number.
• Repeat these steps for the channel in each bank you
want to program as a priority channel.
• To turn on the priority feature, press Func + Pri during
scanning. PRI appears.
Then the scanner checks the designated priority channel
every 2 seconds in each bank.
• To turn off the priority feature, press Func + Pri. PRI
disappears.
Using Keylock
Use the scanner's keylock to protect it from accidental
program changes. When the scanner's keys are locked, the
only controls that operate are
Scan, Func, Hold, , and .
To turn on keylock, press Func + . appears.
To turn off keylock, press Func + . disappears.
Note: Using keylock does not prevent the scanner from
scanning channels.
Using the Display Backlight
• To turn on the display light for easy viewing at night,
press .
The display lights for 15 seconds.
• To turn off the light sooner, press again.
Troubleshooting
If your AE92H is not performing properly, try the following
steps.
