10
4. Replace the cover.
5. Connect the supplied AC adaptor to the scanner’s DC 6 V
socket to charge the batteries at least for some hours before first
time use.
Using Non-Rechargeable Batteries
You can also use two alkaline batteries to power your scanner.
Before you use alkaline batteries, you must remove the sticker in
the compartment and move the switch below the sticker to
REG. ALK. BATT. position.
Notes:
• Use only fresh batteries of the required size and
recommended type.
• Always remove old or weak batteries. Batteries can
leak chemicals that destroy electronic circuits.
• Do not mix old and new batteries, different types of
batteries (standard, alkaline, or rechargeable), or
rechargeable batteries of different capacities.
The switch is factory preset to
NiMH battery and covered by a
sticker. Remove the sticker if You
line batteries
