Filter
Top Products
035-12984-001-A-0204
8 Unitary Products Group
FIGURE 6 - DIMENSIONS & CLEARANCES
Front 610mm (24")
Back
25mm (12") (Less Economizer)
914mm (36") (With Economizer)
Left Side (Filter Access)
610mm (24") (Less Economizer)
914mm (36") (With Economizer)
Right Side (OD Coil) 610mm (24")
Below Unit
1
0mm (0")
Above Unit
2
1829mm (72") (For Outdoor Air
Discharge)
NOTE:
Units and ductwork are approved for zero clearance to combustible materials when
equipped with electric heaters.
1
Units may be installed on combustible floors made from wood or class A, B or C
roof covering material.
2
Units must be installed outdoors. Overhanging structures or shrubs should not
obstruct outdoor air discharge outlet.
HOLE
KNOCKOUT
SIZE
(DIA.)
USED FOR
A 5mm (7/8") *
Control Wiring
(Side or Bottom)**
B 51mm (2") *
Power Wiring
(Side or Bottom)
*Knockouts in the bottom of the unit can be located by the slice
in the insulation.
**Do not remove the 2" knockout ring.
OUTDOOR COIL
(Direct-Drive Units)
829
32-5/8"
1140
44-7/8"
2090
82-1/4"
292
11-1/2"
445
17-1/2"
445
17-1/2"
165
6-1/2"
171
6-3/4"
137
5-3/8
200
7-7/8"
206
8-1/8"
213
8-3/8"
64
2-1/2
UTILITIES ENTRY DATA
All dimensions are in millimeters and
inches.They are subjectto changewithout
notice. Certified dimensions will be pro-
vided upon request.
RETURN AIR
SUPPLY AIR
OUTDOOR AIR
OUTDOOR AIR
(Economizer)