Filter
Top Products
24
MAINTENANCE and SERVICING
For a complete list of spare parts and accessories contact your Yeoman retailer or call 01392 474011
1. ANNUAL SERVICE
1.1 Before the start of the heating season strip, inspect and
clean the appliance as detailed:
—Allow appliance to cool.
—Remove all internal parts; baffle, log guard, grate system
and ashpan (see Installation Instructions).
—Sweep the flue at this point if necessary.
—Vacuum clean any remaining ash and debris from the
inside of the appliance. Yeoman offer a filter/collection
attachment for vacuum cleaners to protect them from fire
ash: Ash Clean (Yeoman Part No. 2091).
—Clean the internal surfaces of the appliance using a
wire brush and scraper as required. Vacuum and brush
the resulting debris from the appliance.
—Clean the grate parts with a wire brush, and check the
parts for any damage. Replace any damaged parts using
genuine Yeoman replacements parts (see below
for details).
—Check and clean the firebricks with a wire brush. Some
surface damage will occur during use. The life of
the bricks will depend on the type of fuels burnt and the
level of use. Replace damaged bricks as soon as possible.
—Re-fit cleaned internal parts.
—Remove glass from door, discard all old rope seals and fit
new (see Maintenance and Servicing, Section 6).
—Clean the door glass using a suitable Glass Cleaner and a
soft cloth.
—Do not use cleaning agents that have a high alkaline
content, for example Stovax Gel Cleaner, on appliances
with painted glass. These are abrasive cleaning agents
that are designed to be used with heavily stained clear
glass. Use Stovax Glass Cleaner (Stovax No.4103) on
more delicate surfaces.
Do not use acidic cleaners on printed glass.
—Fit new door rope seal (see Maintenance and Servicing,
Section 7).
—Lightly oil the door catch mechanism and hinge pins.
Avoid getting oil onto the door seals and glass.
—To refresh painted finishes use Thermolac paint.
1.2 Use genuine Yeoman replacement parts to keep the
appliance in safe, efficient working order. This is a list of the
maintenance products that may need be required:
Task Product name
Yeoman
Code
Number
Glass cleaning
Stove glass cleaner
(spray on)
4103
Preventing build-
up of creosote in
flue
Protector (15 sachets) 7002
Protector (1kg tub) 7025
Sealing flue pipe
joints
Fire Cement (500g tub) 2020
Fire Cement (600g cartridge) 2021
Re-painting Thermolac Metallic Black 2053
Cleaning matt
black appliances
Colloidal black (85ml) 7000
Protecting your
hands
Heat resistant leather gloves 4008
Door sealing rope
14mm black rope seal
(handy pack)
5700
14mm Black rope seal
(25m reel)
4200H
Glass sealing tape
3mm black rope seal
(handy pack)
4975
3mm black rope seal
(25m reel)
4974
ø16mm Rope seal
16mm x 20m white 4096
Insulation tape
10mm x 2mm x 25m black
self adhesive
4953
Thermic seal glue (50ml bottle) 5037
Ash Clean Vacuum cleaner attachment 2091
These products, available from your local Yeoman retailer,
along with regular maintenance and use of correct fuels, will
keep the appliance in the best possible condition.
1.3 For more information about the Yeoman Group products
please visit our web site at www.yeoman-stoves.co.uk
1.4 Burn at a low temperature for the first day of use after any
maintenance. This allows the seals, fixing glues and paint to
fully cure.
1.5 During this time the appliance may give off some
unpleasant odours. Keep the room well ventilated to avoid
a build-up of fumes.
1.6 Your Yeoman retailer can carry out service and
maintenance.