Filter
Top Products
21
INSTALLATION INSTRUCTIONS
4.4 To remove the baffle:
—Open door.
—Lift the front edge of the baffle to clear the support bars.
—Pull the baffle forward to disengage the rear edge from
the location above the secondary air inlet holes.
—Rotate the baffle and remove through the door opening.
—Replace in reverse order.
4.5 It is important to remove the clean baffle system to ensure
the flue ways are clear of soot and debris and to ensure the
safe and efficient operation of the stove. The frequency of
cleaning will depend on the stove operating conditions.
4.6 The baffle system is designed to give safe and efficient
operation of the stove. Replace damaged baffle
immediately.
4.7 Do not modify the baffle system.
5. REMOVAL OF THE GRATE
5.1 To remove the grate:
—Remove the ashpan from under the grate.
—Remove the log guard.
—Unscrew the nut and bolt from the riddling rod using a
10mm A/F spanner as shown in Diagram 6.
6
PR9041
Riddling Rod
Nut
Bolt
—Lift and rotate the centre grate (see Diagram 7).
7
PR9042
Centre grate
—Remove the main grate by lifting the front and rotating it
through the front of the stove (see Diagram 8).
8
PR9043
Grate
5.3 Riddling Rod Removal:
Remove the M5 Grub Screw using a suitable 2.5 A/F Hex
Key.
Remove Handle and rod through the appliance front, See
Diagram 9.
9
PR9044
M5 Grub
Screw
5.2 Replace in reverse order.