PROBLEM POSSIBLE SOLUTIONS
Nothing happens when the telephone detector is activated
with the test button
• Low battery • Replace battery. Only use 9V alkaline 6LR61 or lithium 6F22 type battery.
• The remote is not paired with the detector. Follow the instructions to pair.
The LED lights up yellow when the telephone detector
is activated
• Low battery • Replace battery. Only use 9V alkaline 6LR61 or lithium 6F22 type battery.
The LED lights up green when the telephone detector is
activated, but the remote is not signaling
• Low battery in remote • Recharge
• Remote too far from detector • Move the remote closer to the detector
• Telephone detector set to wrong radio key • Change radio key on all units to different setting. INSTRUCTIONS on page 24.
Remote signals with no apparent reason
• There is probably another system nearby with same • Change radio key on all units to different setting. INSTRUCTIONS on page 24.
radio key that is interfering with your system.
Telephone detector