Filter
Top Products
Bed shaker
What it is
The bed shaker is placed between mattress and box spring of your bed. When
connected to the nightstand (with remote placed in charger), it provides a motion
alert at night if one of your detectors should go off. This helps ensure that you are
made aware of important alerts even when you are sleeping and your hearing
instruments are not in use.
What you need to do: connect to charger, place and test
• Connect the bed shaker to a power supply by inserting supplied connector
into indicated output on the charger.
• Place the remote in the charger.
• Press test button on any of the detectors, and check that bed shaker vibrates.
(If it does not, please refer to the troubleshooting section).
IMPORTANT NOTE! Your remote must be placed in the charger for the bed shaker
to be activated by an alert. The charger must be connected to a power supply or must
have sufficient charge, as indicated by the LED light located on the charger.