Filter
Top Products
PROBLEM POSSIBLE SOLUTIONS
The LED light on door detector lights up yellow when
the doorbell detector is activated
• Low battery • Replace battery. Only use 9V alkaline 6LR61 or a lithium 6F22 type battery.
The LED light on door detector lights up green when the
doorbell detector is activated, but remote is not signaling
• Low battery in remote • Check battery in remote and recharge
• Remote too far from detector • Move remote closer to detector
• Doorbell detector set to wrong radio key • Check that all detectors are set to same radio key. If required follow
pairing instructions on page 24.
The doorbell rings but the detector is not activated
• Detector not positioned in optimal spot next to doorbell • Move detector around the doorbell both closer and further away.
The maximum distance is 1.5 in/3 cm from the doorbell.
• Can’t detect doorbell sound • Try to train detector to doorbell signal. If required follow pairing instruction
on page 24.
The LED blinks yellow
• Door detector is exposed to electromagnetic field from • Turn off magnetic detection on door detector. INSTRUCTIONS on page 25.
loop system, etc.
Remote signals with no apparent reason
• There is probably another system nearby with same • Change radio key on all units to different setting. INSTRUCTIONS on page 24.
radio key that is interfering with your system.
Doorbell detector