Filter
Top Products
1.6 Wiring and Setting for Remote Controller
Double R/C control (when controlling by two remote controller switches)
This control is provided to control one or more indoor units by two remote controllers. Up to 2 remote
controllers can be installed.
No setting is required when using in combination with a wireless remote controller .
Controlling one indoor unit by 2
remote controllers
Setting to use a wired remote controller
as follower R/C:
Change the setting of DIP switch on the
back of R/C switch to “R/C follower” as
shown in the figure.
Setting
This control is provided to control one or more indoor units by two remote controllers.
Up to 2 remote controllers can be installed.
<Wired remote controller>
21
21
21
R/C follower
R/C header
DIP switch
A B
AB
1 2 3
1 2 3
AB
R/C switch
(header)
R/C switch
(follower)
R/C wiring terminals
R/C wiring (on-site arrangement)
Indoor unit
Outdoor unit
OptionOption
Remote controller (back, inside)
– 58 –