Filter
Top Products
– 203 –
Hooking claw
Concave part PMV main unit
Positioning projection PMV coil
Fan guard Bell mouth Discharge
port cabinet
No.
7
8
Part name
PMV coil
Fan guard
Procedure
1. Detachment
1) Carry out work of item 1 of
1
.
2) Turn the coil while pulling upward and then
remove the coil from the PMV main unit.
2. Attachment
1) Surely match the positioning projection of
the coil with the concave part of PMV main
unit and then fix it.
1. Detachment
1) Carry out works of item 1 of
1
and work
of
2
.
XREQUIREMENTX
To prevent scratch on the product, carry out
the work on cardboard, cloth, etc.
2) Remove the discharge port cabinet and
then put on it so that the fan guard side
directs downward.
3) Remove the hooking claws (8 positions) of
the fan guard.
2. Attachment
1) Push the hooking claws (8 positions) with
hands from the front side to fix the claws.
XREQUIREMENTX
Check that all the hooking claws are fixed at
the specified positions.
Remarks