Filter
Top Products
Running the Demos from the Command Line
3-10
3.4 Running the Demos from the Command Line
You can run the demo applications from the Linux shell in a terminal
window connected to the EVM board’s serial port. These are the same
demos described in Section 3.2, Starting the Standalone Demos.
Before running demo applications from the command line, the CMEM
and accelerator kernel modules must be loaded. Use "lsmod" to see if
they are loaded. If not, use the following commands to load these
modules:
Target $ cd /opt/dvsdk/dm357
Target $ ./loadmodules.sh
To see the command-line options for the demos, use one of the following
commands with the -h or --help option:
Target $ ./encodedecode -h
Target $ ./encode -h
Target $ ./decode -h
You can also find the list of command-line options in encode.txt,
decode.txt, and encodedecode.txt in the respective demo directories of
the DVSDK package on the host.