Filter
Top Products
Setting Up the Hardware
2-2
2.1 Setting Up the Hardware
To set up the hardware provided with the DVEVM kit, use the steps that
follow. You may skip steps if you do not need to access a particular
peripheral. For example, if you do not need to use the serial cable, skip
that step.
For reference, the numbers in the following photo of the DM357 EVM
target board correspond to the steps in the procedure.
Important: The EVM board is sensitive to static
discharges. Use a grounding strap or other device to
prevent damaging the board. Be sure to connect
communication cables before applying power to any
equipment.
1
2
3
4
56 7
8
1
2
3
4
56 7
8