Filter
Top Products
Running the Standalone Demos
3-6
8) This information overlays the video; as a result the video you see is
darker than the actual video. To hide the information display so that
you can better see the video, press the "Info/Select" button on the IR
remote. You can change the transparency of the OSD (overlay) while
running a demo by using the left and right arrows on the remote.
9) Press "Stop" or "Pause" when you want to end or pause a demo. The
first time you press "Stop", you return to the settings screen. Press
"Stop" from the settings screen to go back to the main menu.
For information about running the individual demos, see Section 3.3.2
through Section 3.3.4.
The demos use the Codec Engine to allow applications to run algorithms.
3.3.1 Shutting Down the Demos
You can quit out of the demos completely while at the main menu screen
by pressing "Power" on the remote.
Note: It is best to power down the board cleanly in order to reboot
rather than using the reset button or power switch. We recommend
that you use the shutdown command to shut down the operating
system and unmount the file system before removing power from
the board. This will help prevent corruption of the flash-based root
file system.
To restart the demos, you can reboot the board or run the demos from
the command line as described in Section 3.4.