Filter
Top Products
STT40 / STT70
Maintenance 5-14
STT 25
Open the toggle-type fasteners (A) at the hopper lid
and fold the hopper lid upwards (if in use: remove
before the single conveyor).
Clean the drying hopper.
Close the hopper lid and close the toggle-type
fasteners (A) (if in use: re-mount the single
conveyor).
) When cleaning, remove any granules remaining in the hopper lid.
STT 60 - 100
Open the door of the drying
hopper: Lift and turn the
handle (A) to open the lock (if
in use: remove before the
single conveyor).
Clean the drying hopper.
Close the door of the drying
hopper: Turn the handle (A)
until the door is locked and
then close the handle (if in
use: re-mount the single
conveyor).
) When cleaning, remove any granules remaining in the hopper
door.
A
Figure 7: STT 25
Fi
g
ure 8: STT 60 - STT 100