Filter
Top Products
Large Dehumidifying Dryers Controls 41
ALARMS
(Alarm History Screen)
This screen allows the operator to review the number and type of issues that the dryer has
encountered during its operation.
Problems can be viewed by Date, Hour, and Comment.
Because of the size of the screen, only three (3) comments/alarms can be viewed at a
time. Alarm history is not resetable. (Display holds up to 100 messages).
To view alarms not visible on the screen, press the DOWN button.
To return to a particular alarm, press the UP button to scroll upward in the alarm history.
Pressing DRYER in this screen will take the operator to the DRYER STATUS of the
system.
Pressing MAIN will take you to the main screen.
At this point, the operator can return back to the DRYER MENU or MAIN MENU by
touching the appropriate button on the screen.
AUTOTUNE
(Process AutoTune Screen)
This screen allows the operator to automatically tune the process air temperature control
algorithm to a specific drying application. The autotune sequence should be initiated if the
user feels there are unacceptable fluctuations in the process air temperature. The calculated
P, I, and D variables are shown for reference purposes.
The autotune feature can be activated by pressing the START/STOP button located
in the center of the screen. After autotuning is done, it will automatically stop and
give new P, I, and D variables.
AUTOTUNE IN PROGRESS or PROCESS NOT ACTIVE will inform the operator of
the current status of this feature.