Large Dehumidifying Dryers Controls 36
• Copyright Information
• PLC Version
• Display Version
After approximately 10-12 seconds the controller will flash to the Dryer Status Screen shown
on the previous page.
4-4 Identifying Controller Screens
Main Menu Screen
(Main Menu Screen)
The MAIN MENU provides information on the following system parameters:
• DRYER
• ALARMS
• HELP
• SYSTEM
• LOG OFF
Press the DRYER MENU button to return to the next section of dryer functions.
Typical Dryer Screens
(Dryer Status Screen)
(Shown at Controller Power Up)
(Looking at the screen from Left to Right)
The SETPOINT button allows the operator to set the process air
temperature.
The ACTUAL value will give you a reading of what the actual
process air temperature is entering the drying hopper.