Radio Key
®
RK-65K Operating Guide
Secura Key 1
INTRODUCTION
The Radio Key
®
RK-65K is a programmable single-door access
control system which controls access for up to 65,000 users. It
can control an electric strike, magnetic lock, or gate operator,
and has an additional programmable input which may be set
as a remote open input or as an LED/Beeper control for use
with the Wiegand output. A Wiegand output is also provided to
allow for later upgrading to an on line system. Information on
using the RK-65K as a Wiegand reader is contained on page 18
The major components are shown in Figures 1 and 2.
The Radio Key
®
RK-65K Access Control Unit contains the CPU,
memory, access relay, and an internal reader. It has a beeper, and
a bi-color LED indicator. An RK-HHP Handheld Programmer or an
RK-PD1 Program Deck (not included), is used to add or delete tran-
sponders, to set the operating mode, to program the password and
latch timer. The Radio Key
®
RK-65K is compatible with the Secura
Key SecuRelay™, an intelligent relay module used to eliminate the
possibility of break-in by attacking the access control unit.
The current version of this product also replaces the RK100M.
The RK100M reads randomly encoded tags and supports only
100 users. To convert this unit to RK100M mode, follow the
instructions on Page 21.