Filter
Top Products
Radio Key
®
RK-65K Operating Guide
Secura Key 13
(SET TIMER)
(ENTER)
(2 Hours, 45 Minutes)
(THRU)
For longer latch times it may be easier to set the timer with hour:
minute notation. Press SET TIMER; then press the sequence of
digits representing the number of hours (2 digits); then press the
sequence of digits representing the number of minutes; then press
THRU; then ENTER. (The maximum relay time is 18 hours and
00 minutes.) For example, to set the latch timer for 2 hours and
45 minutes the following sequence would be followed:
+ 0 + 2 + 4 + 5 + +
If you have set an extended latch time, but need to interrupt it,
follow this procedure. Put the unit in Program Mode (see Page 8).
Then press Set Timer then “1” then Enter. After the Program
Mode expires, present a valid card to the reader. After one
second the relay will return to it’s normal state. You will then
have to reprogram the latch timer to the desired duration.
PROGRAMMING HINTS:
Setting the Latch Timer (RK65K/RK100M):
The latch timer controls the latch relay. The factory preset latch time
is 1 second but it can be changed to any value from .25 seconds
to 18 hours. If the latch timer is set to 0 seconds, this pulses the
latch relay for 0.25 second, suffi cient for most electric turnstiles.
The beeper and LED are always fi xed at one second.