Filter
Top Products
(Password)
(ENTER)
To Enter Program Mode (RK65K/RK100M):
Using your programmer, enter your password and then press
“ENTER”. (All new units are pre-programmed with the password
12345.) The LED will fl ash amber to show that the unit is in
Program Mode. The unit will “time out” and return to Active
(Normal) Mode in 15 seconds if no programming follows.
1 + 2 + 3 + 4 + 5 +
NOTE: If fi ve incorrect passwords are entered, the unit will
sound an alarm and display a red LED for 30 seconds, then
return to normal mode.
Change your Password (RK65K/RK100M):
Put the unit into the Program mode, if necessary (See above).
Press THRU. Then enter the sequence of digits representing
the desired new password (exactly 5 digits). Then press THRU
again. Repeat the new password. Press ENTER. A green light
and beep means that the Password was changed. Note that
12345 is the default (factory) password; use another number
sequence for best security.
Radio Key
®
RK-65K Operating Guide
Secura Key 8